Jump to content

Victorian Railways A2 class

Add links
From Wikipedia, the free encyclopedia
This article is about the 1907 A2 class steam locomotive. For the 1884 'Old' A class steam locomotives, see Victorian Railways 'Old' A class (1884). For the 1889 'New' A class steam locomotives, see Victorian Railways 'New' A class (1889). For the 1900 AA class steam locomotives, see Victorian Railways AA class. For the 1984 A class diesel locomotives, see V/Line A class.

Victorian Railways A2 Class (Walschaerts)
A2 986 leading Cruise Express' 'Southern Steam Spectacular' rounding the curve in Golden Square.
Type and origin
Power typesteam
BuilderNewport Workshops
Ballarat North Workshops
Bendigo Workshops
Total produced185
Specifications
Configuration:
​
 • Whyte4-6-0
Gauge5 ft 3 in (1,600 mm)
Driver dia.73 in (1.854 m)
Length63 ft 3+3⁄4 in (19.30 m)
Axle load17 long tons 10 cwt (39,200 lb or 17.8 t)
Adhesive weight52 long tons 2 cwt (116,700 lb or 52.9 t)
Total weight121 long tons 7 cwt (271,800 lb or 123.3 t)
Tender cap.(after conversion to oil firing)
1,500 imp gal (6,800 L; 1,800 US gal) oil, 4,700 imp gal (21,000 L; 5,600 US gal) water
Firebox:​
 • Grate area29 sq ft (2.7 m2)
Boiler pressure185 psi (1,276 kPa)
Heating surface2,040 sq ft (190 m2)
CylindersTwo
Cylinder size22 in × 26 in (559 mm × 660 mm)
Valve gearStephenson (125)
Walschaerts (60)
Performance figures
Tractive effort27,480 lbf (122.24 kN) at 85% boiler pressure
Career
First run1907
Last run1963

The A2 class was an express passenger locomotive that ran on Victorian Railways from 1907 to 1963. A highly successful design entirely the work of Victorian Railways' own design office, its long service life was repeatedly extended as the Great Depression and later World War II delayed the introduction of more modern and powerful replacement locomotives.

History

[edit]

The introduction of the A2 class marked a turning point in Victorian Railways locomotive design, as it was entirely designed by VR engineers of the newly established Locomotive Design Section and the entire class built in-house at Victorian Railways workshops.[1]

Production

[edit]

Based on the success[2] of the prototype A2572, a total of 125 Stephenson valve gear A2 locomotives were built between 1907 and 1915. The design was then altered to incorporate larger diameter cylinders, a higher pressure boiler and Walschaerts valve gear, and a further 60 locomotives of that design were produced between 1915 and 1922.[1]

Regular service

[edit]

For over forty years, the A2was the main express passenger locomotive on the VR, hauling intrastate and interstate services. With a maximum permitted speed of 70 miles per hour (115 km/h),[3] the A2was instrumental in the acceleration of timetables on many lines in the years following its introduction. A2 locomotives famously hauled the Geelong Flier,[4] the first named train in Victoria,[5] which ran express once a day in each direction between Melbourne and Geelong in 63 minutes, running from Flinders Street station,[6] later cut to 55 minutes, running from Spencer Street station.[7] However, other Geelong trains, stopping at wayside stations, still took about 90 minutes or more to make the journey.[6]

Due to their comparatively heavy axle load, A2 locomotives were initially limited to the principal mainlines, but gradual upgrades to secondary lines saw the route-availability of the class expand, together with the range of services they hauled.[8] Their size also meant that the outside cylinders of the new locomotives did not quite clear the stone or timber coping of some existing station platforms, requiring those platform edges to be cut back slightly to allow the locomotives to pass safely.[9]

With their comparatively high tractive effort (the Walschaerts A2 had a higher nominal tractive effort than any other VR locomotive, regardless of type, until the introduction of the C class 2-8-0 of 1918), they also saw widespread use as a fast goods locomotive, particularly later in their life.[1] As early as the 1920s, it was reported as normal practice that A2 class locomotives requiring adjustment to axle boxes and other moving parts be swapped from passenger to lower-speed freight service to extract more work from them between overhauls.[10]

A2s were also used to haul a number of special services, such as the Royal Trains for Australian tours of Prince of Wales and the Duke of York, in 1920[11] and 1927 respectively. Towards the end of their lives, A2995 and 996 also had the distinction of hauling the last broad gauge Spirit of Progress service into Melbourne on 16 April 1962.[12]

In 1933, two A2 class locomotives set a haulage record for Victorian Railways when they headed a 75-truck 1,598-long-ton (1,624 t) wheat train from Benalla to Seymour.[13]

In 1928, the A2 was replaced on the principal North East line Sydney Limited and Albury Express services by the considerably more powerful three-cylinder S class Pacifics. However, new locomotive development ground to a halt during the 1930s,[14] with the Great Depression severely affecting both VR traffic volumes and operating revenues, so the A2 continued to be the main express passenger power on all other VR mainlines.

Design Improvements

[edit]

The majority of A2 locomotives were originally built with saturated steam boilers. The class were gradually fitted with superheaters, and to differentiate between the two variants the saturated steam locomotives were renumbered as A1 class, each being reclassified as A2 class again when fitted with a superheater. Many engines were renumbered two or three times as the railways' management attempted to keep the two subclasses in different number blocks, and as the boundaries between the blocks shifted through the superheating program. The last of the A1 class, No. 808, was converted in October 1949.

Experiments were conducted in 1923–4 with A2 800 using Pulverised Brown Coal (PBC) burning equipment, but the experiment was discontinued and the locomotive returned to black coal operation.[15]

The A2 class, along with other post-1900 VR steam locomotive designs, was equipped with electric lighting from 1926 onwards. Automatic Staff Exchange equipment to allow non-stop high-speed running between track sections was also fitted from 1926 onwards.[16]

Modified front end

[edit]

In 1933, C class heavy goods locomotive C 5 was equipped with a new front end, based on the Association of American Railroads (AAR) design of self-cleaning smokebox, to improve steaming qualities. The results were very promising, and in 1934 A2998 was selected for a series of further tests aimed at further front end improvement, conducted under the direction of VR Rolling Stock branch engineer, Edgar Brownbill.[17]

Diagram of A2 locomotive boiler, firebox and smokebox following Modified Front End improvements

Experiments were conducted, based on the work of Dr Wagner of the Deutsche Reichsbahn and E. C. Young of the University of Illinois, with final modifications to the A2 locomotive including:[17]

  • Revision of exhaust nozzle and chimney position and diameter, using Wagner's recommended ratios, with a larger 23 in (580 mm) diameter funnel, and a 6 in (150 mm) diameter low exhaust nozzle replacing the original 18+1⁄2 in (470 mm) diameter narrow-flanged chimney and 5+1⁄2 in (140 mm) diameter high exhaust nozzle
  • Revision to the firebox grate, using a "rosebud" type grate with reduced air openings to improve fire stability under heavy load and give better firing qualities
  • Replacement of full-length 1+3⁄8 in (35 mm) return bend superheater elements with 8 ft 6 in (2.59 m)-long 1+1⁄2 in (38 mm) elements

The sum result of the changes was a significant improvement in power and available tractive effort. Maximum drawbar horsepower increased about 40%, from 860 hp (640 kW) at 26 mph (42 km/h) to 1,230 hp (920 kW) at 32 mph (51 km/h).[17] The improvement was such that the VR was able to further accelerate services hauled by the A2, with the running time of the Melbourne to Bendigo express on the steeply graded 100+3⁄4 mi (162.1 km) line being cut from 162 to 145 minutes, and literally hours being cut from the schedule of the Melbourne to Adelaide Overland express.[18]

The Modified Front End, which cost just £140 ($280) per locomotive at that time, was an extremely cost-effective improvement, and allowed the VR to defer new locomotive construction. The modification was so successful that not only was the entire A2 fleet converted during 1936–39, but also the C, K, N, S and X class locomotive fleets, and its principles were also incorporated into the design of all subsequent steam locomotives built for VR.[17][19]

Other changes

[edit]

In 1935 an experimental A.C.F.I. (Accessoires pour les Chemins de Fer et l'Industrie) feedwater heater was fitted to A2973. However, there was not sufficient improvement in efficiency for the equipment to be fitted to other locomotives and it was removed twelve years later.[8]

With the reduced exhaust blast resulting from the revised smokebox, smoke deflectors were fitted to prevent drifting smoke from obscuring visibility.[20]

In the years following World War II, problems with the quality and availability of coal supplies caused VR to order the conversion of all 60 Walschaerts A2s to oil firing; in practice, only 56 were altered as four were scrapped before the conversion could be completed.[1]

Late in their life, some of the A2s also received Boxpok driving wheels[8] as their conventional spoked wheels began to suffer fatigue cracks with age and mileage.[21]

Later years

[edit]

In 1939, by which time most of the class was already over twenty-five years old, World War II broke out. The massive increase in traffic on the VR the war effort brought saw these ageing locomotives subjected to a punishing regime of heavy utilisation and minimal maintenance.[14]

Stephenson A2884 (right) dwarfed by H 220 (left), the locomotive intended to replace the A2 on Overland services

With VR's locomotive workshops switched to production of armaments and all available manpower given to the war effort, plans to eliminate the double-headed A2 operations on Melbourne–Adelaide passenger services with the introduction of more powerful H class 4-8-4 locomotives and additional S class locomotives did not come to fruition. The extra S class locomotives were never built and the line to Adelaide did not receive the necessary upgrades to take the weight of the H class.[22]

The A2's principal express passenger role continued into the postwar years as the VR, struggling with a backlog of repairs and limited capital expenditure, deferred new passenger locomotive construction. It was not until March 1946 when the first of the class, A2878, was withdrawn from service.[8]

In 1951, when the first of 70 new R class 4-6-4 express passenger locomotives were introduced, the A2 was finally superseded. In 1953, no fewer than 53 A2s went to scrap, followed by 36 more in 1954.[8] However, many of the class (particularly the later Walschaerts variants) continued on in secondary roles such as branch-line passenger and goods services and a number lasted into the 1960s. Their last regular mainline duty was hauling services between Flinders Street and Leongatha, on the South Gippsland line. The last in service, A2986, was withdrawn on 2 December 1963, exactly 56 years after the original A2572 entered service.[8][23]

Accidents

[edit]

Some A2 locomotives were unfortunate enough to be involved in major accidents:

  • At 2:58 am on 7 September 1951, the westbound and eastbound Overland expresses, both hauled by double-heading A2s, collided head-on at Serviceton.[24][25] All four locomotives were written off; three were so badly damaged they were scrapped on site.
  • Australia's worst level crossing accident occurred on 8 May 1943, when A2863 collided with a bus carrying troops at Wodonga.[5] 25 people were killed.[26]

List of engines and renumberings

[edit]

The A2 fleet was constructed in ten batches. All the Stephenson engines, batches 1 to 8, were constructed at the Victorian Railways' Newport Workshops. The same is true of Batch 9 and the first 20 engines of Batch 10. However, engines 1073–1077 (later 973–977) were built at Ballarat Workshops, and 1078–1082 (later 978–982) were built at Bendigo Workshops. There is no indication as to where engines 1083–1092 would have been constructed.

These tables are based on:

  • Medlin, P. N. (2004) Victorian Railways Locomotives by Number (self-published, based on Victorian Railways' locomotive repair cards)
  • Australian Railway History, August 2019 (Web extra)[27]
  • Victorian Railways locomotive record cards[28]

Stephensons engines

[edit]

Walschaerts engines

[edit]

Preservation

[edit]
Preserved A2 995, circa 1990
A2 996,
A2 986 at Newport station during a test run in 2015
A2 986 approaches Warragul on its official re-launch trip, 13 May 2017
A2 986 at Ballarat Station, 10 June, 2023

Only one of the original batch of 125 Stephenson A2 locomotives survives; 1913-built A2884 is today preserved at the Newport Railway Museum, along with (Walschaerts) A2995.[8] The museum notes that A2884 ran a total 1,002,624 miles (1,613,567 km) and A2995 a total 1,270,404 miles (2,044,517 km) during their service lives.[36]

A2964 is preserved at Edwardes Lake Park, Reservoir and A2996 in Echuca.[8]

After a 32-year-long effort, Steamrail Victoria restored A2986 to full working order as a coal burner. It first moved under steam on 30 May 2015 and entered service with Steamrail on 13 May 2017.

References

[edit]
  1. ^ a b c d Pearce et al., p. 12
  2. ^ "steamlocomotive.com Locobase #2385". Archived from the original on 27 September 2007. Retrieved 2 October 2006.
  3. ^ Pearce et al., p. 21
  4. ^ "A2 Class Steam Locomotive No.906 Geelong Flier First Trip". Public Record Office Victoria. Retrieved 3 September 2024.
  5. ^ a b "VR History". victorianrailways.net. Archived from the original on 30 May 2008. Retrieved 4 May 2008.
  6. ^ a b Bau, Mark. "Melbourne-Geelong-Port Fairy". Victorian Railways.net. Retrieved 3 September 2024.
  7. ^ "The Pride of the Diesel Fleet". The Victorian Railways Newsletter. July 1950. Retrieved 25 April 2008.
  8. ^ a b c d e f g h Oberg, Leon (1984). Locomotives Of Australia 1850's - 1980's. NSW: Reed Books. p. 96. ISBN 0-7301-0005-7.
  9. ^ "The Railways - Improvements at Wodonga Station". Wodonga and Towong Sentinel. Victoria. 25 February 1910. Retrieved 3 September 2024 – via Trove.
  10. ^ "Newport Workshops". The Argus. Melbourne. 4 January 1922. p. 14. Retrieved 3 January 2013 – via National Library of Australia.
  11. ^ Public Record Office Victoria Series VPRS 12800/P1 Item H 1027 Archived 1 September 2007 at the Wayback Machine retrieved 2 October 2006
  12. ^ "Victorian Railways, Museum Victoria, Australia: Spirit of Progress A2-class steam locomotive No. 995, 16 April 1962". prov.vic.gov.au. Retrieved 25 April 2008.
  13. ^ "Huge Wheat Haul by Train". The Horsham Times. Vic. 6 June 1933. p. 4. Retrieved 3 January 2013 – via National Library of Australia.
  14. ^ a b "AHRS Railway Museum: History 1900–1950". Australian Railway Historical Society. Archived from the original on 19 July 2008. Retrieved 2 October 2006.
  15. ^ Pulverised Brown Coal Fuel for Steam Locomotives Buckland, John L. Australian Railway Historical Society Bulletin, July 1972 pp145-161
  16. ^ "A2 locos". victorianrailways.net. Retrieved 14 June 2009.
  17. ^ a b c d Abbott, R.L. (November 1971). "Steam Locomotive Performance – the Modified Front End". ARHS Bulletin (409). Australian Railway Historical Society.
  18. ^ Lee, Robert (2007). The Railways of Victoria 1854–2004. Melbourne University Publishing Ltd. p. 157. ISBN 978-0-522-85134-2.
  19. ^ "100 defining aspects of Australian railways" (PDF). Australian Railway Historical Society. Archived from the original (PDF) on 16 July 2011. Retrieved 10 May 2008. (H220) had... benefit of Brownbill's modified front-end experience
  20. ^ Stevens, Colin (December 2000). "Stack Talk". Stack Talk. 11 (3). Steamrail Victoria: 10.
  21. ^ Carlisle, R M & Abbott, R L (1985). Hudson Power. ARHS. pp. 30–31. ISBN 0-85849-028-5.
  22. ^ Pearce et al., p. 19
  23. ^ "steamtrainartist.com Victorian Railways 'A2' CLASS 4-6-0". Archived from the original on 10 August 2004. Retrieved 2 October 2006.
  24. ^ "Auditor General's Department EMA Disasters Database". Archived from the original on 26 September 2007. Retrieved 2 October 2006.
  25. ^ "Railpage Discussion". www.railpage.com.au.
  26. ^ "Australian Defence Department: On This Day – 8 May". Archived from the original on 3 September 2007. Retrieved 2 October 2006.
  27. ^ "August 2019 WEB EXTRA" (PDF). arhsnsw.com.au.
  28. ^ "Motive, Power, & Steam" (PDF). victorianrailways.net.
  29. ^ a b Steam Power
  30. ^ a b c d e f Australian Railway History, August 2019, supplementary p.6.
  31. ^ "How rail crash happened". The Argus. 2 July 1947. Retrieved 26 January 2022.
  32. ^ "VR A2 class - variations".
  33. ^ "VR A2 class - variations".
  34. ^ a b c d e ARHS Bulletin Supplement 1/58
  35. ^ a b c d e f g h i j "A2 Class history".
  36. ^ Railway Museum (guide to exhibits). ARHS. 2008. p. 30.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Victorian_Railways_A2_class&oldid=1251097696"